DJI Mic Mini 2S Charging Case

DJI Mic Mini 2S Charging Case

The DJI Mic Mini 2S charging case stores and charges the microphone system’s transmitters and receiver, ensuring the equipment is always ready for your next shoot. The case protects the system whilst in transit and also keeps small accessories safe. Take a look at our other microphone accessories.

The cover controls start-up and charging

When you open the lid, the devices switch on and pair automatically. When you close the lid, charging begins, and the devices switch off automatically once the batteries are fully charged.

High-speed data transfer and firmware updates

USB data transfer operates at speeds of up to 34 Mt/s, meaning that a 30-minute 24-bit audio file can be transferred in around 8 seconds. The firmware for the transmitters and the case is updated via the connected receiver.

Main features

• The built-in battery can fully charge two transmitters and the receiver at the same time approximately 3.2 times.
• The storage compartment holds 2 transmitters, a receiver, a mobile receiver, 2 magnetic clips, 2 magnets, 2 windscreen covers and a 3.5 mm TRS audio cable.
• Opening the lid automatically starts up and pairs the devices.
• Charging begins once the lid is closed, and the devices switch off once the batteries are fully charged.
• Audio files are transferred quickly to the computer via USB.
• The case itself takes about two hours to fully charge.

Technical specifications

• Dimensions: 106.30 × 42.50 × 59.20 mm
• Weight: approx. 160 g
• Battery: Li-ion 1950 mAh (7.55 Wh, 3.87 V)
• Charging capacity: approx. 3.2 full charges (2 transmitters + 1 receiver)
• Charging time: approx. 2 hours
• Charging power: max 5 V, 3 A
• USB data transfer: up to 34 Mt/s
• Operating temperature: -10–45 °C

You can find more from DJI’s range From the DJI brand page.