KUPO KCP-101 Max Arm with Adjustable Handle

KUPO KCP-101 Max Arm with Adjustable Handle

The two 5/8″ (16 mm) pins at each end are attached to ball joints that rotate 360 degrees, and the sleeve surrounding the joint has a cutout that allows the pin to be bent to a 90 degree angle.

One pin is threaded for 3/8″ 16 thread and the other for 1/4 20 thread. Each pin has six smoothly ground surfaces so that a device attached to the Max Arm arm will not rotate.

The central joint rotates 360 degrees, so it is infinitely adjustable.

The Max Arm is equipped with user-interchangeable special kit plates with anti-slip rosettes to prevent unwanted movement.

An adjustable ratchet handle slowly increases tension until all three joints lock at once, making accurate positioning easy.

Supports loads up to 4 kg.

Main features

• Black aluminium finish
• Adjustable arm allows you to position a camera light or accessory in seconds
• Supports loads up to 4 kg
• The joints are loosened and tightened simultaneously with a single handle
• Six ground flat surfaces for secure fixing